This morning I started bricking the chimney with egg cartons....As I worked, I kept trying to think of an easier way to do all of the brick and stone work that I do with egg cartons....Light bulb over the head moment....
I stopped cutting tiny bricks and started playing. Mad scientist experiments are much more fun than bricking.
I have done bricks and tiles with illustration board, just cutting groves for grout into the board with an Exacto knife. I wondered if I could do the same thing with egg cartons?
First, I tried just doing half inch brick in the egg carton, rough side, with a tiny stylus. It kind of worked, but not as well as I wanted. I don't think that 1/2" scale will be possible because the egg cartons aren't as hard pressed as illustration board.
Next, I tried 1" scale stone work. First I painted a mottled, all over pattern with my Hippo Gray and Trail Tan. I left some egg carton showing through.
Then I took a NEW BLADE in and Exacto and started cutting a V shape into the carton for grout lines between the stone. Not bad at all for a first try. If I do it again, I will probably draw the lines on the painted carton first. I think that I am happiest with this application.
To take the experiment a bit further, I decided to carry on to bricks in one inch scale.
The first one is the lighter red. I just painted the egg carton with shades of brick and then carved the mortar lines in. Unfortunately, if you don't let it dry thoroughly, the lines can be a bit ragged in places. It looks pretty good though.
The third try was the darker brick. I first flooded the piece with hippo gray. Then I painted over that with the dark red. Again, I carved too soon. I was anxious to see how it was going to look. I like the mortar better, but next time I will soak it better. The gray didn't penetrate the carton as deeply as I would have liked it to go.
I am going to try again and wait impatiently for 24 hours before carving. As with the stone, I will mark the lines before cutting for the next try.
You MUST use a fresh blade in your knife for this technique to work. The egg cartons chew up blades quickly. I probably should have changed blades between the second and third example.
When I do the bricks with illustration board, I go through a LOT of blades. The tile floor in my Southwestern Roombox is done with this method and I think that I used 3 or 4 blades just on that floor.
I need to go back to work now...More experimenting....
See you tomorrow.
12 comments:
Hi Casey. It's interesting that I was just experimenting like this with egg cartons for a 1/2 scale kitchen floor. I didn't want to cut out individual bricks either.I didn't get as far as you did though. Thank you for doing the work for me. You're so clever!
Phyllisa
Phyllisa, I would suggest that you use either illustration board or mat board for 1/2". The bricks are too small and the egg carton separates. Kind of a mess.
Very interesting.
Bye Faby
Very crafty! I'll have to give this a try one of these days...
Looks great!
Thanks, Casey. A very helpful process to know!
I like that you take us through your process - it's fascinating to me.
xo
Claudia
I love <3 when you get light bulbs over your head!! Thanks for sharing!
Looks so real! I would love to try this. Will you put some kind of sealer on this? Thank you for sharing your knowledge with us! Hugs, Morena
Morena, I will certainly seal it if I use it on any buildings. Right now, it's only in the experimental stage.
Most all our eggs are packaged in that styrofoam stuff so I don't get much of that good egg carton material. But I have been successful using the foam trays from fresh vegetables with a similar technique. The "bricks" are quite smooth but it looks ok in many settings.
I just became a follower. I am reading every post! I am working on a "modern farmhouse" that needed stone at the base. I think I will give this technique a try. I am so glad to have found you when I did!
So many little things, I still like the method of cutting out the stones seperately for foundations. You might go look at the foundation on the Clockwork trailer.
Post a Comment